Carrier Upc Open. Carrier UPC Open Controller OPNUPC BAS eBay Installing the UPC Open Wiring the UPC Open to the CCN network The UPC Open's CCN Port communicates using EIA RS-485 and supports 9600 bps Perform the following proce- dure to assign an address: 1
Carrier OPNUPC Communications Card GSIstore from www.gsistore.com
Future versions will support baud rates of 19.2 and 38.4 kbps The UPC Open enables a stand-alone, single piece of equipment to reside on a BACnet network, where it can be monitored or controlled by a Building Automation System (BAS)
Carrier OPNUPC Communications Card GSIstore
The UPC Open can convert proprietary equipment data into open protocol data Installing the UPC Open Wiring the UPC Open to the CCN network The UPC Open's CCN Port communicates using EIA RS-485 and supports 9600 bps The power and network connections are also protected against transient excess voltage/surge events lasting no more than 10 msec
The Basics of Open Carrier Transport Metti International. Simply connect the UPC Open to the BACnet network, and your Carrier equipment is ready to integrate seamlessly into the i-Vu Building Automation System or any other BACnet Building Automation System. CAUTION To protect against large electrical surges on serial EIA-485
Carrier UPC Open Controller OPNUPC BAS eBay. Future versions will support baud rates of 19.2 and 38.4 kbps The UPC Open enables a stand-alone, single piece of equipment to reside on a BACnet network, where it can be monitored or controlled by a Building Automation System (BAS)